TURCK
Vietnam

Model: IM33-14EX-CDRI
Monitoring
 (7560015)

Temposonics/ MTS Sensor Vietnam

Code: RP5SA0850M01R021A100
Temposonics® R-Series
Note: Recheck delivery time before order

Temposonics/ MTS Sensor Vietnam

Code: EP00250MD341V03
Temposonics® E-Series
Note: Recheck delivery time before order

Temposonics/ MTS Sensor Vietnam

Code:  251416-2
Assy, Mag Sro-12 Monolithic
Note: Recheck delivery time before order

Temposonics/ MTS Sensor Vietnam

Code: 370685
Cable assy mold 5 pin
 Note: Recheck delivery time before order

Temposonics/ MTS Sensor Vietnam

Code:  403508
Mounting clamp
 Note: Recheck delivery time before order

Temposonics/ MTS Sensor Vietnam

Code:  EP00300MD341V03
Temposonics® E-Series
Note: Recheck delivery time before order

Samwon Technology Vietnam

Model: TEMI1500-00/SD/N/N/B
Temperature Controller

Watlow Vietnam

FLANGE CIRCULATION - HEATER ONLY
Drawing no. 593256
SINGLE PASS , OUTDOOR-SHADED
FLOW RATE : 1000 LB/HR
INLET TEMPERATURE: 70.0 F
OUTLET TEMPERATURE: 140.0 F
OPERATING PRESSURE: 50 PSIG
 VOLTS: 380
PHASE: 3 3ph-Delta
ELECTRICAL CLASSIFICATION: CLASSIFIED - ZONE 1
AGENCY / PROTECTION METHOD: IEC Ex 'd'
TERMINAL ENCLOSURE TYPE : FLAMEPROOF / IP66
ASME SECTION VIII, DIV. 1 : IAW
 GROUP: IIC
TEMP RATING : T3 (200C)
DESIGN KW :10.0 KW
 WATT DENSITY: 8.6 (WATTS/IN2)
 FLANGE SIZE: 6 NPS
FLANGE CLASS: 150
NOTE: Part 700-97BE1296: Obsolete due to lack of activity.
The replacement heater will NOT be including the small control panel that was attached back in 1997, only the heater.

Vaisala Vietnam

DPT146 A1DCX110A0A
DPT146 Dewpoint Transmitter
Mechanical connection: Glass Feed Through G1/2
Measurement parameters: Td/f, p, ppm, Td/f atm
Analog output Ch1 & Ch2 + RS-485 as standard: Analog Output 4...20mA
Ch1: Td Range for Analog Out Td-60...+40C cal std
Ch2: p free scale (0..12bar, 0...174psia)
Metric Units
Cable for analog outputs and power supply (Port I): 0.3 m (1.0 ft) shielded M8 threaded connector
Cable for RS485 line and power supply (Port II)
No Installation accessories (ONLY for ISO1/2" thread)
Reserved: No Special
User' s guide: No Manual

Bartec Vietnam

07-8324-45461000
Connection

Euchner Vietnam

Article: TZ2RE024SR6
Order no.: 049102
SAFETY SWITCH SENSING

Euchner Vietnam

Article: BETAETIGER-Z-G
Order no.: 016849
ACTUATOR

Wika Vietnam

Bourdon Tube Pressure Gauges, Safety Pattern
Bourdon Tube Pressure Gauges, Stainless Steel
Series
Model: 233.50
Specifications according to data sheet: PM 02.02
Measuring system: stainless steel
Case filling: with
Nominal size: 063 mm
Scale range: 0...10 bar
Process connection: R 1/4-ISO7 (DIN2999)
Connector location: lower mount
Window: laminated safety glass
Pointer: standard pointer
Accuracy class: class 1.6
Overpressure safe: standard
Case material: Stainless steel 1.4301
Case surface: bare
Material pressure element: Measuring System 316 SS
Case filling fluid: glycerine
Ingress protection: IP 65
Permissible medium temperature: + 100 °C
Permissible ambient temperature: -20 … +60 °C
Movement: stainless steel
Packaging: single packing
Pressure Gauge Standard: International (standard Europe)

Wika Vietnam

Bourdon Tube Pressure Gauges, Stainless Steel
Series
Model: 232.50
Specifications according to data sheet: PM 02.02
Measuring system: stainless steel
Case filling: without
Nominal size: 063 mm
Scale range: 0...1 MPa
Process connection: M14 x 1,5
Connector location: lower mount
Window: laminated safety glass
Restrictor: stainless steel, D 0.6
Pointer: standard pointer
Accuracy class: class 1.6
Overpressure safe: standard
Case material: Stainless steel 316TI
Case surface: bare
Material pressure element: Measuring System 316 SS
Case filling fluid: prepared for filling
Ingress protection: IP 65
Permissible medium temperature: + 100 °C
Permissible ambient temperature: -20 … +60 °C
Movement: Silicon damped movement stainless steel
Packaging: single packing
Pressure Gauge Standard: International (standard Europe)
stop pin on dial: at zero
** Offer with silicon damped for vibration purpose.
** Please check and confirm the spec

Wika Vietnam

Bourdon Tube Pressure Gauges, Stainless Steel
Series
Model: 232.50
Specifications according to data sheet: PM 02.02
Measuring system: stainless steel
Case filling: without
Nominal size: 160 mm
Scale range: 0...4 MPa
Process connection: M20 x 1.5
Connector location: lower mount
Window: laminated safety glass
Pointer: adjustable pointer
Accuracy class: class 1.0
Overpressure safe: standard
Case material: Stainless steel 1.4301
Case surface: bare
Material pressure element: Measuring System 316L
Case filling fluid: prepared for filling
Ingress protection: IP 65
Permissible medium temperature: + 200 °C
Permissible ambient temperature: -40 … +60 °C
Movement: stainless steel
Packaging: single packing
Pressure Gauge Standard: International (standard Europe)
** Gauge can be stand up to 200 degC only
** Please check and confirm the quoted spec

Hirschmann Vietnam

Hirschmann MACH104-20TX-FR
942003-101
HIRSCHMANN 3616457
20x10/100/1000MB; 4xGE Combo, red. Power
Industrial Ethernet Workgroup Switch