(Raytek) Fluke Process Instrument

T40-LT-30-SF0-1
Thermalert 4.0 Series
Low temp -20 to +600°C, 8 to 14 µm, D:S 33:1, 30ms
Standard focus at 1520mm for LT15, LT30, LTB30, LT50, LTD, G530, P730, MT30, HT60, 1ML, 1MH, 2M, 3M models
 6-pin terminal strip connector model
RS485 digital connection
TC/0 to 10V/4 to 20mA/0 to 20mA output
Micro USB for remote setup

ADFweb

Code: HD67733-5-A1
Description : Converter

Atrax
 

Art number: OP-960+
Operator Panel

Atrax
 

LCC-5
Load Cell Cable (5m)

E2S

Model: GNExCP6BPTDSLAS3A1RN24E470R
Push Button Tool Reset Call Point

E2S

Model: STExCP8PTDPLAS3A1RNExxxRSxxxR
Reset/Momentary Call Point

E2S

Model: SP65-0001-A4
Pole Mount Bracket Kit 2" St/St A4 (316)

Eltra

Code: EH115R512/512Z8/24L11X3PR.262+2400
Encoder

FISHER
 

Model: : KC50P-97
Serial No: 40130869
 Spare parts Kits
Size: 2
 Pressure Units: PSIG.
Max inlet: 150 Range: 6-20. %CAP: 100
 Max casing press: 150
 Valve

Greisinger (GHM)

Code: OXY3690MP-0-GGO-A1-L01
Air oxygen-Measuring converter incl. electrode
O2-Sensorelement: GOEL 370
Model: opend sensormodel
Output signal: 4-20 mA
Measuring range: 0.0..100.0 % Vol O2 (recommended for 0.2 .. 35.0 % Vol O2)
Cable length: 1,3 m Cable

Hengesbach

Piezoresistive pressure transmitter TPF050DCS_60bar_KT2
for relative and absolute pressure
flush welded stainless steel diaphragm
 housing made in CrNiSt 304 (1.4301) hygienic design
potted electronic
 2-key- concept -and multi colored status LED for parametrization
 protection class IP 67 and IP 69K in acc. with EN 60529
power supply 12...30V DC
output signal 4...20 mA, 2-Leiter
turn-down 4
linearity ≤ ±0,2% FS
overload protection≥ 2,5-fold sensor measuring range
 Process connection: CS, Clamp DN 40 with tubus L=33,5mm
in mat. AISI 316L (Wkst. 1.4435)
/* incl. O-ring-gasket 25x5, Material EPDM (FDA-conform) */
ordering information:
 Sensor measuring range / adjusted measuring range: 100bar rel / 60bar rel
/*** Please note: the process connection is only approved to up to 55bar, even with reinforced clamps ***/
electrical connection: cable gland M16x1,5
temperature design: extended temperature resistance to up to 200°C
options : (no)
in acc. with data sheet PN-TPF050D… the actual version

Hengesbach

Piezoresistive pressure transmitter TPF050DCS_25bar_KT2
for relative and absolute pressure
flush welded stainless steel diaphragm
 housing made in CrNiSt 304 (1.4301) hygienic design
potted electronic
 2-key- concept -and multi colored status LED for parametrization
 protection class IP 67 and IP 69K in acc. with EN 60529
power supply 12...30V DC
output signal 4...20 mA, 2-Leiter
turn-down 4
linearity ≤ ±0,2% FS
overload protection≥ 2,5-fold sensor measuring range
 Process connection: CS, Clamp DN 40 with tubus L=33,5mm
in mat. AISI 316L (Wkst. 1.4435)
/* incl. O-ring-gasket 25x5, Material EPDM (FDA-conform) */
ordering information:
 Sensor measuring range / adjusted measuring range: 30bar rel / 25bar rel
electrical connection: cable gland M16x1,5
temperature design: extended temperature resistance to up to 200°C
options : (no)
in acc. with data sheet PN-TPF050D… the actual version